DeWalt DFD405902

DFD405902_1_1000X1000-1-e1659470185391.jpg

What is a DeWalt STICK-E Cable Tie Donut? Well, if you are hoping for a glazed donut, you will be disappointed. If you are looking for a fast clean way to bundle cable, you will be pleasantly surprised at this simple little piece of plastic. As you look at the design you will see the slots are large enough for your standard ties and up to ½” hook and loop cable ties. As you look at the side view, you see the mount is scalloped a little bit to seat the cable. You will also notice no sharp metal edges like a ceiling clip. There are a few ways to mount it quickly to concrete, wood and steel.

Concrete & Masonry Materials. The DeWalt DFD405902 STICK-E Cable Tie Donut is designed to be used with the DeWalt, DC890P2 battery concrete nailer and the STICK-E contact probe. These tools are becoming more common in the low voltage, electric and mechanical fields. They are expensive but more and more tradesmen are finding this a nice addition to their toolbox. They are quieter than powder actuated tools and require no license to operate. For this application, the tool has a magazine of pins, and you stick the donut cable mount on the probe and fire away. A simple fast and easy way to attach you bundle to the concrete.

Wood. While intended for mounting quickly to concrete, the cable tie donut can be mounted to wood with a simple #6 coarse drywall screw. Just start the screw and it will pull its way through the donut and cinch down tight. If you are going to a plywood backer board, you would want either a #6 x ¾” or 1” coarse drywall screw. If you are mounting to a wood stud through drywall, a #6 x 1-1/4” or 1-5/8” should work.

Metal. There may a few different applications where you could be mounting to metal. If you are mounting to a metal stud through drywall, a sharp point fine drywall screw may work but if it is a heavier gauge stud, you may need a self-drilling drywall screw. If you are mounting to something like a cabinet or a rack, a self-drilling screw with a #3 point may be needed.

The DeWalt DFD405902 STICK-E Cable Tie Donut is a nice alternative to a ceiling clip with a more finished look and no sharp edges. And keep in mind it’s not just limited to it’s original mounting option with the DeWalt battery concrete nailer. With the right screw the STICK-E Cable Tie Donut makes an excellent mount for cable ties and hook and loop alike.   Visit ConstructionFastening.Net to see these and other products in the DeWalt Stick-E Line up.


Construction Fastening Systems, Inc.

Specialty tools & fasteners for the trades.
952.230.7725Toll Free 1.877.212.2377

cfsdelivers.com

contact@cfsdelivers.com

Serving the entire U.S.

Based In Twin Cities, MN



Follow Our Activity

Sign up for our email list!


Newsletter Sign Up